Centrifuge for Lab Automation
”Robo-Ready” Series for Lab Automation
Step Stop Centrifuges
In the future, lab automation is expected to increase.
Lab automation is expected to increase operational efficiency, reliability of results, and reproducibility.
However, the combination of lab automation and centrifuges is not a good relationship.
Although centrifuges are general-purpose laboratory instruments, they cannot stop the rotor at a defined position.
Step stop mixer-centrifuge stop the rotor at defined positions so that the robot arm can pick up the sample tubes.
TOMY-RESO will support the lab automation with Step Stop Centrifuges.
Robo-Ready is a series of centrifuges with a rotor stops at a defined position developed for lab automation.
This centrifuge is for lab automation.
Made In Japan
System Integrator
Friendly
Bench-Top Step Stop CentrifugeLCXR-100
Features
Wide variety of sample tube applications
・Accommodates angle rotor or swing out rotor
・Can load a variety of sample tubes, such as 15 ml, 50 ml, 250 ml*
・Max. speed at 10,000 rpm for 50 ml sample tubes**
*Swing out rotor TS-33R
**Angle rotor CA-16R
Accessories
- Swing rotor
- TS-33R［50 ml～250 ml］
- Angle Rotor
- CA-16R［50 ml conical tube ×8］
Specification
| Product | Bench-Top Step Stop Centrifuge |
|---|---|
| Model | LCXR-100 |
| Rotor Stopping potions | 4 positions (Rotate Angle every 90°) |
| Max. Speed | 10,000 rpm |
| Max. RCF | 11,740 G (Angle rotor CA-16R) |
| Max. Capacity | 1,000 ml (Swing out rotor TS-33R) |
| Speed Setting Range | 100 rpm to 10,000 rpm (100 rpm increments) |
| Time Setting Range | From 10 sec to 50 sec, in 10 sec increments, From 1 min to 99 min, in 1 min increments or |
| Dimension | 430W × 582D (Lid Open 690D) × 514H (Lid Open 940H) mm |
| Net Weight | Approx 49 kg |
| Power Requirements | 1-Phase AC100 V 50 / 60 Hz 15 A (Compatible with 115 V) |
| Rated Current | 8 A |
| Power Consumption | 430 W (370 Kcal / h) |
| External Interface | Terminal 1:Contact closure signal input (Select the rotor defined positions from 1 to 4, Start) Output during power-on Terminal 2:PATLITE Corporation's LED Signal Tower Lights |
| Safety Devices | Imbalance Detector Abnormal Speed Detector Lid Interlock Overcurrent Circuit Breaker（Rated breaking Current 15 A） Lid Open / Close Detector Rotor Identification System Motor Overcurrent Detector |
Product Video
Bench-Top Step Stop Centrifuge LCXR-100
Step Stop Mixer-Centrifuge SMCR-006
About TOMY
Contributing to the creation of a society where people can live in good health, both physically and mentally, as a company that provides solutions.
Since its foundation in 1958, TOMY is the leading autoclave sterilizer and centrifuge manufacturer in Japan, and providing superior services to customers across various industry segments, including biotechnology, biological engineering, medical science and food development worldwide.
With the mission of “contributing to the development of biotechnology and bringing happiness to people around the world”, we have been constantly evolving to meet the changing needs of the times based on our abundant experience and knowledge for more than half a century since our establishment. We are proud that our proactive approach to development in response to our customers’ needs has become one of our strengths, and has led to our future-oriented foresight and deep trust.
The times are becoming faster, more complex, and more globalized. As “a company that provides solutions” that considers the problems of humankind as its own challenges, in addition to the achievements it has cultivated over the years, we will continue to work together with everyone to create a society where people can live in good health, both physically and mentally.
The specifications and appearance of the product are subject to change without notice.
Illustrations are for illustrative purposes only and may differ from the actual color and shape of the product.
© 2024 TOMY SEIKO CO., LTD. All rights reserved.